3 MOA VS 6 MOA AR15 PISTOL HOW TO

After successful mounting, the last part is sighting before making decent shots. You need to make sure that you have mounted the red dot properly before sighting or zeroing your pistol. Mounting can make or break your shooting accuracy.

You will tighten them later after sighting is over. Tighten the screws loosely but make sure the dot sight is secure.Use Loctite again for the top screws before driving them to the holes.Once the mounting plate is secure, place the sighting instrument on it and align the screw holes. Place the sighting optics and tie loosely.To check on how tight they are, you can use a torque wrench, but itР“СћРІвЂљВ¬РІвЂћСћs optional. Do not drive to tighten until you have worked on them both.Work on one screw at a time to make sure the Loctite works.Before you drive each of them, apply a little Loctite on them and then use the screwdriver.Once the plate is in line, get the mounting screws and drive them down. Make sure the rear screw holes are in line with the holes on the lower mounting piece you inserted in step 1.After the first step above, now place the mounting plate on the slide. Place the mounting plate on the slide.You can also push it using a sight pusher if you prefer sliding it in but make sure itР“СћРІвЂљВ¬РІвЂћСћs centered. Place the lower mounting piece on the space and clamp it in.You will have to remove the screws first to access it. From the Glock, the lower piece is screwed on the mounting plate.If you have mounted a rear sight, remove it and leave the cut off area open. Place the lower mounting piece on the back part of the slide.Since we already have pistols with cut out slides to fit in optics, we are going to explain how you can use the dented area to fix your optics.

3 MOA VS 6 MOA AR15 PISTOL HOW TO

Part 2: How to Mount a Red Dot Sight on a Pistol The red one is okay too, but you will need extra heat to drive the screws out. For proper mounting and to make sure the optics sits tight on the pistol, carry with you the blue Loctite for the screws.Remember, as you mount, you need to have the right plate.Therefore, it is better to go for Glock mounting plates which you can change depending on the sighting optics you are using. Nowadays, the pistols coming into the market have already been cut to fit an optic. It will also cost you more to have the slide machined for the custom slide.If you need something that needs a different mounting method, it will be hard to use it. Next, it might limit you to the dots you can use.First, it varies depending on who did the cutting on the slide.If you choose to go for it, here is what you need to know: Most of the people who donР“СћРІвЂљВ¬РІвЂћСћt too much mounting work will go for the milled custom slide. If you choose Vortex Company, for example, and pick the vortex viper or venom red dot sight, it will be easier to switch to the other since they all have the same mounting specifications. If you need to change to a red dot with a higher or lower MOA, itР“СћРІвЂљВ¬РІвЂћСћs advisable to pick a brand that has different options. On the other hand, even in longer distances, it will still function as expected. In pistols, 3 MOA is enough since you will not be aiming longer distances.You may get various recommendations depending on the shooting distance and the gun you are using.You could get one with 6 MOA, 3 MOA, 3.25 MOA, 1 MOA, etc. The dual technology types will suit both conditions, but you have to spend more on batteries. However, it is sometimes hard to use it in ambient light, and thatР“СћРІвЂљВ¬РІвЂћСћs why itР“СћРІвЂљВ¬РІвЂћСћs recommendable to stick to LED only. Tritium dots are suitable during the night time or in low light conditions. Dual technology: It has both LED and Tritium.Tritium dot: This dot uses a radioactive isotope of hydrogen.Adjustable LED only: Uses LED light to sight.In pistols, you have three basic options to choose from: Part 1: Basic Pistol Mounting Considerations To clear out the confusion and know what you need to mount your red dot, here is a guideline that you can use to get your gun ready for the shooting expedition. If one of you is using the custom slide option, someone else had their slide machined a little to accommodate the sighting instrument. On the other hand, how they are mounted is different depending on the approach each one used. We have already seen our counterparts using different types of laser sights. If you need a red dot sight on your pistol, then you already know the reason you need it there Р“СћРІвЂљВ¬РІР‚Сљ better aiming as you shoot.

3 moa vs 6 moa ar15 pistol